SYS-03 — Flake Broadcast System
Desert Sand
Desert Sand draws on the warm, sun-baked tones of the New Mexico landscape. Beige, tan, and caramel flakes are broadcast over an amber-tinted epoxy base and sealed with a polyaspartic topcoat. A fit for residential interiors, retail spaces, patios, and basements across the Southwest.
SystemFlake broadcast
BaseAmber-tinted epoxy, 2-coat
TopcoatPolyaspartic
SheenSatin / Semi-gloss
Flake Colors
SandTanCaramelCream
Ideal For
Residential InteriorsRetail SpacesPatiosBasements
Project Gallery
Installation Process
HOW IT'S INSTALLED
01
Surface Grinding
The concrete is mechanically ground with diamond tooling to remove surface contaminants and open the slab for coating.
02
Profiling & Repair
Cracks, spalls, and control joints are filled with polyurea joint filler and ground flush. Moisture readings are taken before coating.
03
Epoxy Base Coat
The epoxy base coat is mixed on site and rolled onto the prepared surface.
04
Full-Broadcast Flake
Color flakes are broadcast into the wet base coat to full saturation. Excess flake is blown off and swept once cured.
05
Topcoat Application
A polyaspartic topcoat is rolled over the flake layer, locking in the color and sealing the surface.
06
Cure & Walkthrough
The floor is left to cure before it goes back into service. We walk the finished job with you before leaving the site.
Get a Quote
INTERESTED IN DESERT SAND?
Fill out the form and we'll follow up with a quote for your space.
(505) 450-2162SYS-03Desert Sand
